4-liter heater-1

0 Reviews | Write a review

Product information

The 4-litre heater is equipped with a pure titanium water storage tank, which ensures that there is no ‘after taste’. What’s more, high-vacuum insulation around the tank maintains the temperature at the correct level (above 100˚C), guaranteeing negligible standby loss.

Optimal boiling water flow can be reached with 2 - 3 bar mains water pressure connected to the system, but at least a minimum of 1 bar is required with a maximum of 5 bar. Compact in size, the heater fits comfortably into your undersink cupboard. The 4-litre heater (also the 8-litre combi heater) can be installed in combination with our 3-in-1 boiling water tap.

The 4-litre is suitable for a family home but larger households may prefer the 8-litre version with twice as much boiling water capacity.

Review this product

There is currently no review written for this product, be the first to write a review on this product!

Write a review

FAQ

How is the Hotspot Titanium installed?

Installation is super easy! There are multiply options:

Do it yourself. With every new appliance there will be a step-by-step installation guide included.
Choose our installation service. We arrange a time that suits you and an dedicated Hotspot Titanium engineer will come and install your HotSpot Titanium. Contact us for more info.
Have it installed by a plumber of your choice.

Will it fit in my Kitchen?

Do I lose a lot of room in my kitchen cabinets because of the Hotspot Titanium?

The short answer is no, you don’t lose room in your kitchen. The most common standard width for kitchen cabinets is 600mm, but standard carcasses are sold in widths of 300mm, 400mm, 500mm, 800mm and 1,000mm. Vertical dimensions vary, but work surfaces are usually fitted at a height of 910mm. Therefore, Hotspot Titanium water heaters will fit beautifully under your sink!

The measurements of our titanium heaters are as following:

Hotspot Titanium 4-litre heater(WxHxD): 8.26x12.80x11.22 inches - 209.8 X 325.1 X 284.9 mm
Hotspot Titanium 8-litre heater (WxHxD): 8.26x20.67x11.22 inches -209.8 X 525 X 284.9 mm

How much energy does the Hotspot Titanium use? What are the costs?

The standby heat loss, or energy that the Hotspot Titanium uses even when no water is drawn, is approximately 25 Watt for an 8-litre water heater and approximately 16 Watt for a 4-litre water heater. If you think about a typical in-home wireless router, the HotSpot Titanium is equivalent when it comes to energy usage.

It costs an estimate of 9 pence a day for an 8-litre and 6 pence a day for a 4-litre heater (assumed 15 pence / kWh) Remember, this depends on the energy supplier and rates, among other factors.

The below table shows the difference between a conventional kettle and Hotspot Titanium 4 and 8-litre. We have considered the amount of energy it would take to make six 250ml mugs of tea or coffee on six separate occasions with a kettle (partial kettle-fill of 500ml). The cost equated to £0.063p per 24 hours – this based on 3kW Kettle x 84 seconds to boil = 0.07 kWh. With an assumed cost of 15p/kWh x 0.07 kWh = £0.011p.

	Kettle	Hotspot Titanium4-litre	Hotspot Titanium8-litre
Element rating	3kW	2.1kW	2.1kW
Assumed pence per kWh	15p	15p	15p
Cup/Mug size	250ml	250ml	250ml
Break-even point	9 drinks	9 drinks	13 drinks
Energy consumption cost of break-even point (over 24 hour period)	£0.09p	£0.09p	£0.14p

How long does the warranty last?

Hotspot Titanium products are manufactured with great care, which is why we guarantee free repair of all material or structural defects within its warranty period.

Warranty period:

2-year warranty on all other components (calculated from the date on the receipt)
5-year warranty extension once your product is registered via our website.
20-years leakage warranty on our titanium tank